Home | Plastic Industry | Suppliers By Categories | Suppliers By Products | Suppliers By Materials



Home » Polycarbonate Products

Polycarbonate Products


» Polycarbonate Bags

» Polycarbonate Enclosures

» Polycarbonate Polymers


» Polycarbonate Resins

» Polycarbonate Rods

» Polycarbonate Sheets

» Polycarbonate Tubes


Rashtriya Ispat Nigam Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Visakhapatnam Steel Plant Main Administrative Building , -1 - 530031 , India
Phone: 91-8455-2886396
Fax: 91-8455-2518316
View Catalog
Ruchi Overseas
Deals in pp woven sack, polypropylene woven sacks/ bags, pp mats, nylon fishing nets, hdpe high density polyethylene ropes & pp ropes - polypropylene rope.
Address: A/3/3, 3rd floor, Groma House, Sector -19, Vashi , Mumbai - 400 705 , India
Phone: + 91 - 22 - 27895431/27895433
Fax: + 91 - 22 - 27895439
View Catalog
Tatanagar Wire Ropes Pvt. Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: B - 32 Phase 3, Adityapur Indus. Area , Jamshedpur - , India
Phone: 91-657-2200452
Fax: --
Website:
View Catalog
Angel Global Logistics
Suppliers, exporters and wholesale manufacturers of polyethylene sheets, air bubble polyethylene sheets, packaging aluminum foils, shrink packaging films, composite containers, tin containers, cardboard packaging containers, etc.
Address: 421, Vyapar Bhavan 49, P. Dmello Road, Masjid East , Mumbai - , India
Phone: (91)-(22)-66160200
Fax: (91)-(22)-66548187
Website:
View Catalog
Govind Traders naraina
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Cb-334, Ring Road , Naraina , New Delhi - 123456 , India
Phone: +91-011-5465440
View Catalog
Weldmaxx Inc.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 26-26-32, Harbour Approach Road, Sea Horse Junction, Visakhapatnam , Visakhapatnam - 530001 , India
Phone: 91-33-9652834552
Website:
View Catalog
Simco Exports Pvt. Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Simco House, 43 A/2, Gurudwara Road, Dilshad Garden , Delhi - 110 006 , India
Phone: + 91 - 11 - 22116666
Website:
View Catalog
Esskay Material Handling Equipments & Systems
We are a solution Provider for complete material handling equipments & Systems based at Bangalore / Visakhapatnam. Our range of product include, Nylon & Polyethylene Idlers, Standard Idlers, Portable / Standard Conveyors, Side walled & Corrugated side walled Conveyor Belts & all components of Conveyors.
Address: No 113, Basement Floor, 2h Main,1st Cross, Kasturi Nagar,east Of Ngef Lay Out,bangalore - 560043 , Bangalore - , India
Phone: 91-560049-9483527761
View Catalog
Deepak Cables India Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Bangalore , Bangalore - 56006 , India
Phone: 080-080-9916785168
View Catalog
Fujian Cee Installations Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.20, Jinzhou North Road, Golden Mountain Industrial Zone, Fuzhou - 350002 , Fuzhou - , China
Phone: 86-591-83849865
Website:
View Catalog
Ramco Ancillary
Ramco Ancillary are engaged in manufacturing and exporting of plastic packaging for industrial tools, plastic bags, polypropylene bags and polyethylene bags, etc.
Address: A-701, Garden Estate, Khopat, Thane (W) , Thane - 400601 , India
Phone: 91-22-25364318
Fax: 91-22-25386304
Website:
View Catalog
Chien Shern Enterprise Co. Ltd. connector
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 3F, No. 1, Lane 114, Ho Ping Rd., Lu Chou City , Taipei Hsien - 24750 , Taiwan
Phone: + 886 - 2 - 22839012
Fax: + 886 - 2 - 22881063
View Catalog
Ability Electronics
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: U- 70, IIIrd Floor, Near Laxmi Nagar Metro Station, Shakarpur , Delhi - 110 092 , India
Phone: +(91)-(11)-22058649/ 22508649
Fax: +(91)-(11)-43097334
Website:
View Catalog
Bandna Trading Co.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Wz1a, Uttam Nagar (w) , Delhi - 110059 , India
Phone: 91-11-9717025592
Fax: --
Website:
View Catalog
In-touch Furnishings
Retailers, exporters and suppliers of webbings, draw cords, leather cords, polypropylene ropes, twines including high density polyethylene mono filament ropes, polypropylene mono filament ropes, cotton rope, twines fabrics, ropes fabrics, cloth fabrics, nylon webbings, jute webbings, organza tape, satin tape.
Address: 32/3185, BEADON PURA, KAROL BAGH , Delhi - , India
Phone: 91-11-28723655
Website:
View Catalog
Ningbo Huyong Electric Power Material Co. Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.2, Xicheng Road, Jiangbei District, Ningbo - 315031 , Ningbo - , China
Phone: 86-574-87573608
Fax: 86-574-87571103
Website:
View Catalog
Unison Technology
Manufacturer and supplier of plastic raw materials such as abs plastic granules, additive masterbatches, black masterbatches, color masterbatches, engineering plastics, plastic masterbatches, plastic raw materials supplies, polymer compounds, pp granules, reprocess granules, uhmw polyethylene, white masterbatches.
Address: A-402,Shankar Dhan Plaza, Nahur Road, Mulund , Mumbai - 400 080 , India
Phone: +(91)-9867368614/ 9820677008
Website:
View Catalog
Suzhou Xiangcheng Zhengxu Wires And Cables Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Chengnan Road, Yangcheng Town, Xianngcheng District, Suzhou - 215138 , Suzhou - , China
Phone: 86-512-65424603
Website:
View Catalog
Bobkay Polymers & Irrigation Pvt. Ltd.
Engaged in manufacturing, exporting and wholsale supplying of single screw extruder plants, plastic control valves, filteration equipment, non corrosive pipes, non toxic pipes, flexible polyethylene pipes.
Address: 1683, Hsidc,Indl. Estate, Rai , Sonipat - , India
Phone: 91-130-3207131
Website:
View Catalog
Damiano
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 133 Canning Street , Kolkata - , India
Phone: 91-33-22424951
Website:
View Catalog
Shanghai Linyu Trading
We are leading supplier of bag making machine, Printing machine, Polystyrene, Polyethylene, Chemical Additives etc.
Address: 601 Zhangyang Road, 7007 , Shanghai - , China
Phone: +86-21-58361690
Fax: +86-21-58361689
View Catalog
Electrical Cables & Conductors Private Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Binoy Bhawan, 8th Floor, 27B Camac Street , Kolkata - 700 016 , India
Phone: + 91 - 33 - 22476945/22263942
Fax: + 91 - 33 - 22890691
Website:
View Catalog
Zhejiang Longyou Yushi Ge-elec Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Chengnan Industrial Development Zone, Longyou County, Quzhou - 324000 , Quzhou - , China
Phone: 86-570-7363111
Fax: 86-570-7363888
Website:
View Catalog
Masseera Engineering
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: P.O. Box: 22071 , Sharjah - , United Arab Emirates
Phone: + 971 - 6 - 5329883
Fax: + 971 - 6 - 5329985
View Catalog
Yash Paper Products
We are manufacturer, supplier and exporter of paper cups, printed cup, polyethylene coated cup, pe coated paper, paper dish, silver dish, paper cup making machine, paper dish machine, polyethylene coated paper cups, paper dishes, pe coated paper products, paper dish making machine.
Address: Near Euro Acrylic Industries, Lilapar Road , Morbi - , India
Phone: 91-9712041001, 9925270368
Website:
View Catalog
Beijing Huaxia Yongle Adhesive Tape Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No. 8 Donghuan Bei Road, Economic And Technological Development Zone , Beijing - , China
Phone: 86-10-67885886
Fax: 86-10-67870068
Website:
View Catalog
Nishtha Enterprises, Roorkee
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 33-A, Dayalbagh Colony , Roorkee - , India
Phone: +(91)-(1332)-267225
Website:
View Catalog
China Lubao Cable (group) Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Changjiang East Road, 490, Hefei - 230011 , Hefei - , China
Phone: 86-551-4316611
Website:
View Catalog
Shurtape Technologies Inc.
Suppliers, retailers and manufacturers of polyethylene adhesive tapes, hypoallergenic adhesive paper tapes, aluminum foil tapes, resiglass tapes, neck sleeves, wax coated paper, aluminium foils, etc.
Address: 1506, Highland Avenue NE , Hickory - , United States
Phone: (1)-(828)-3222700
Website:
View Catalog
A V India Plasto Polymers Private Limited
We manufacture & suppliers of high density polyethylene sheets, ldpe rods, hdpe rods, ptfe rods, pp color sheets, ldpe products, ldpe tubes etc.
Address: Shop No. 8, Chandra Bhawan Complex, Opposite K. S. B Pumps, Bombay- Pune Road, Pimpri , Pune - 411 018 , India
Phone: +(91)-(20)-27422859
Fax: +(91)-(20)-27422859
Website:
View Catalog
Novoflex Marketing Private Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 3.B, Camac Street , Delhi - 700 016 , India
Phone: + 91 - 11 - 22260733/22290523
Fax: + 91 - 11 - 22265939/22297814
View Catalog
Union Quality Plastics Ltd.
We are leading manufactures of polyethylene fabric based products for packaging, shelter, waterproofing and horticultural applications.
Address: 5th Floor, A.g.h. Chambers, 379/381, Narshi Natha Street, Masjid Bunder (west) , Mumbai - 400009 , India
Phone: 91-222-23401643
Fax: 91-222-23401643
Website:
View Catalog
D.s.enterprises
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: E-711, Dsidc, Narela Industrial Park, Narela , Delhi - , India
Phone: 91-11-0117781258
Fax: 91-11-0117781258
Website:
View Catalog
Sri Lakosha Polymer Private Ltd.
Manufacturing and exporting of plastic resins, polyethylene, polyethylene resins, multicolor master batches, antistatic agent master batches, industrial grade PVC resin, pure PVC resin, etc.
Address: No. 1, Raja Street, Kallimadai Thottam, Nanjappa Nagar, Singanallur , Coimbatore - , India
Phone: 91-422-2572279/2572278
Fax: 91-422-2572279
Website:
View Catalog
Kangaroo Plastics Middle East Llc.
Trader and manufacturer of service-high density polyethylene pipes, bonded fiberglass wool, fibreglass products, costume jewelry, costume jewellery, hdpe pipes, plumbing pipe, pvc irrigation pipes, etc.
Address: P.O. Box 50912, Jebel Ali - 50912 , Dubai - , United Arab Emirates
Phone: 971-4-8804700/701
Fax: 971-4-8804702
Website:
View Catalog
Presto Stantest Pvt. Ltd. (material Testing Instruments Division)
Wholesale exporters and retailers of profile cutting machines, plasma cutting machines, hydraulic hose cutting machines, bangle cutting faceting machine, wire rope cutters, polyethylene tube cutters, etc.
Address: I-42A, DLF Industrial Area, Phase-1 Delhi Mathura Road , Faridabad - , India
Phone: (91)-(129)-4085000
Fax: (91)-(129)-4083111
Website:
View Catalog
Xiamen Brandnew Color Steel Structure Co., Ltd
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No5, Fuming Road, Xike Town, Tong'An, Xiamen - 361100 , Xiamen - , China
Phone: 86-592-59280466
Fax: 86-592-5980499
Website:
View Catalog
Poly Grow Plastics
Manufacturer and supplier of plastic raw materials such as abs plastic granules, additive masterbatches, black masterbatches, color masterbatches, engineering plastics, plastic masterbatches, plastic raw materials supplies, polymer compounds, pp granules, reprocess granules, uhmw polyethylene, white masterbatches.
Address: No. 4 / 402, Tulsidham, Ghod Bunder Road, Thane West , Thane - 400 607 , India
Phone: +(91)-(22)-25893690/ +(91)-(251)-2871198/ 55922986
Website:
View Catalog
Hindustan Chemicals
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Near Telephone Exchange, G.T. Road (NH-91) , Khurja - 203 131 , India
Phone: + 91 - 5738 - 244912/242262
Fax: + 91 - 5738 - 241202
View Catalog
K.M. Cables
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 4 A/17, Gautam Street, New Vishwas Nagar, Shahdra , Delhi - 110 032 , India
Phone: + 91 - 11 - 22392142/22382358
Fax: + 91 - 11 - 22382358
Website:
View Catalog


Recent Catalogs
Manufacturer and exporters of scaffolding fittings like cuplock system, kwik stage system, ring syst...

Producers and wholesale suppliers of printing inks, screen printing ink, pad printing ink, digital p...

Shako plastick are manufacturers of pharma plastic products such as oral vaccine droppers or polio d...

Ashirvad known as pvc pipes industry in india having developed number of products such as hand pump ...



1

http://www.eindiabusiness.com/emarubber




Move to Tupperware




 
 
Finished & Semi Finished          Products
Plastic Raw Materials &          Supplies
Resins & Compounds
Moulds and Dies
Spare Parts And Components
Plastic Scraps
Thermoplastic Materials
Thermoset Materials
more...
 
 
Plastic Construction Materials
Plastic Medical Products
Plastic Packaging Products
Plastic Pipe Fittings
Plastic Dies & Molds
Plastic Toys & Games
Plastics Mixers
PVC Pipe Plant
Moulds and Dies
Plastic Scraps
Thermoset Materials
Thermoplastic Materials
Plastic Furniture
more...
 
 
HDPE Products
LDPE Products
Polycarbonate Products
Polyethylene Products
PTFE Products
PVC Products
Plastic Bags
Polyurethane Products
FRP Products
more...
 
Plastic HS Codes
Plastic SIC Codes
Plastic Technology
Associations
Acronyms
Periodicals
more...
 
 
 


 Still not able to find what you are looking for ?
 


Product Yellow Pages
Service Yellow Pages
Industry Verticals
eIndiaBusiness MembersCopyright © Plastic Industry Portal. All Rights Reserved
Site Designed & Promoted by Advent Infosoft Pvt. Ltd.