Home | Plastic Industry | Suppliers By Categories | Suppliers By Products | Suppliers By Materials



Home » Suppliers By Materials » Polyethylene Products

Polyethylene Products


» Polythene Bags

» Polyethylene Pipes

» Polyethylene Resins

» Polyethylene Sheets

» Polyethylene Wax




San Polymer
Manufacturing and exporting of tubing bags and polyethylene lay flat bags, centre fold sheeting, plain lay flat tubing, polyethylene plastic sheets, polypropylene plastic sheets, plastomatic, brass pipe fittings, vacuum valves, etc.
Address: G-3/40, Model Town Iii , Delhi - , India
Phone: + 91 - 11 - 919891001440
Website:
View Catalog
Jbm Steels International
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Ratan Mansion 4th Floor, 2nd Khetwadi Lane , Mumbai - 400004 , India
Phone: 91-22-23235424
Fax: 91-22-23233240
View Catalog
The Chemical Company
Manufacturers of chemicals such as ammonium persulfate, potassium persulfate, sodium persulfate, polyethylene terephthalate pet resins, hexamethylene tetramine.
Address: P. O. Box 436, 19B Narragansett, Jamestown - 02835, United States Of America , Denver - , United States
Phone: (1)-(401)-4233100
Fax: (1)-(401)-4233102
Website:
View Catalog
D S Enterprises
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: E-711, Dsidc, Narela Industrial Area , Delhi - 110040 , India
Phone: 11-91-0019127781258
Fax: 11-91-0019125552754
Website:
View Catalog
Onteck
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 1st Floor, 2nd Eastcom Building, 398 Wensan Road, Hangzhou - 310013 , Hangzhou - , China
Phone: 86-571-87208910
Fax: 86-571-87208928
Website:
View Catalog
Best Auto Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Delhi Jaipur Highway, 38KM Stone, Bahrampur Road, Vill Khandsa , Gurgaon - 122 001 , India
Phone: + 91 - 124 - 2372736/2372737/2372987/2372380
Fax: + 91 - 124 - 2372204/26852647
View Catalog
D - Trade Sp z o o
HDPE(High density polyethylene) 1.fit for any kind of chemical products and Pesticides 2.High quality and best price Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
Address: Ul. Kościuszki 49/1 , Katowice - 40-048 , Other Country
Phone: +48-22-389 7469
View Catalog
Shenztech Technologies Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 4209B, SEG Electronic Building, Hua Qiang Bei Rd, Futian District , Shenzhen - 518 000 , China
Phone: + 86 - 755 - 61333071
Fax: + 86 - 755 - 61333074
View Catalog
Rotocast Castings Limited
Manufacturer and exporters of EPE (expanded polyethylene foams).
Address: 587, Urla Industrial Complex , Raipur - 493 221 , India
Phone: + 91 - 771 - 2323215/2323340
Fax: + 91 - 771 - 2324004
View Catalog
Svploy Systems Pvt., Ltd.
Manufacturer and supplier of plastic sheets, tarpaulin sheets, high density polyethylene sheets, plastic material, engineering plastics that includes polyethylene, UHMW polyethylene, cast nylon, polyamide, polyacetal, plastic packaging materials such as backrest trays, packing for stationery products, kitchenware packing products, plastics, related sub assemblies and mold designs for automobile, lighting, electrical, telecom, etc.
Address: Hydreabad , Hyderabad - 500057 , India
Phone: 91-40-9849046619
Fax: --
Website:
View Catalog
Fusion Polymer Industries
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 48, L S C, DDA, Site 42 M O R - Land, Kalkaji , Delhi - 110 019 , India
Phone: + 91 - 11 - 26462271/26225025
Fax: + 91 - 11 - 26225025
Website:
View Catalog
Sarveshwar Plast
Exporters, retailers and suppliers of twines including high density polyethylene mono filament ropes, organza tape, satin tape, webbings, draw cords, leather cords, polypropylene ropes, polypropylene mono filament ropes, cloth fabrics, nylon webbings, twines fabrics, ropes fabrics, jute webbings, cotton rope.
Address: VADAVA TALAVADI, NEAR MANGAL VIHAR, BHAVNAGAR - 364001 , Bhavnagar - , India
Phone: 91-278-2427670
Website:
View Catalog
Electronic Industrial Source
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 386, B-3, Sec-6, Rohini , Delhi - 110 085 , India
Phone: 91-11-25999292
Fax: 91-11-25994567
View Catalog
Chongqing Tianhong Electrical Wire And Cable Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Room 6-1, Building 9,Panlong Garden, Danzi Shi, Nanan District , Chongqing - , China
Phone: 86-23-60732339
Fax: 86-23-62395229
Website:
View Catalog
Havells India Ltd
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: QRG Towers, 2D, Sec- 126, Express Way , Noida - , India
Phone: +91-120-4771000
Fax: +91-120-4772000
Website:
View Catalog
Em Gee Cables & Communications Lts.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 505, Navjeevan Complex, 29, Station Road , Jaipur - 302006 , India
Phone: 91-141-2369914
Fax: 91-141-2375010
Website:
View Catalog
Contec Electronics
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Shop No 1, P.P Dias Compound, Off Western Express Highway, Opp.Shankarwadi, Near Masjid, , Mumbai - 400 060 , India
Phone: +91-022-28236276
Website:
View Catalog
Shurtape Technologies Inc.
Suppliers, retailers and manufacturers of polyethylene adhesive tapes, hypoallergenic adhesive paper tapes, aluminum foil tapes, resiglass tapes, neck sleeves, wax coated paper, aluminium foils, etc.
Address: 1506, Highland Avenue NE , Hickory - , United States
Phone: (1)-(828)-3222700
Website:
View Catalog
Aasma Tape Industries
Wholesale supplier and producer of cotton rope, twines fabrics, ropes fabrics, organza tape, satin tape, webbings, draw cords, leather cords, polypropylene ropes, polypropylene mono filament ropes, cloth fabrics, nylon webbings, jute webbings, twines including high density polyethylene mono filament ropes.
Address: PANJRAPOLE ESTATE, VADVA TALAWADI, BHAVNAGAR - 364001 , Bhavnagar - , India
Phone: 91-278-3291351
Website:
View Catalog
Indo Exports
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 124-C , Pocket - C, Mayur Vihar-II , Delhi - 110 091 , India
Phone: + 91 - 11 - 22788004
Fax: + 91 - 11 - 22788004
Website:
View Catalog
Akshay Systems
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 1st Floor, Devidas Niwas, Saptashrungi Hsg. Soc., Rupeenagar, Talwade , Pune - , India
Phone: 91-20-27692516
Website:
View Catalog
Jindal Tapes Private Limited
Manufacturers and exporters of adhesive tapes, packaging tapes, polyethylene tapes, food pouches, laminated rolls, adhesive tapes, self adhesive tapes, Bopp self adhesive tapes, etc.
Address: Plot No.22, Sector-59, HSIDC Industrial Estate, Ballabgarh , Faridabad - , India
Phone: (91)-(129)-4154600/3295605
Fax: (91)-(129)-4154600
Website:
View Catalog
Sahil Enterprise
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 4/16, Sonal Apartments, Jay Prakash Nagar Road No.2, Goregaon - East , Mumbai - 400 063 , India
Phone: + 91 - 22 - 26860990
View Catalog
Vintek Chemicals
Exporting and manufacturing resin that includes bonding resins, polyamide resins, polyethylene resins, polypropylene resins, polystyrene resins, polyurethane resins, phenolic resins, phenol aldehyde unmodified resin, phenolic foam resins, flame retardant phenol formaldehyde resins, straight phenolic resin and phenolic resins etc.
Address: Anandvan, F-51/02, Plot No-6, Phase- Iii, Sector-4, Nerul. Navi Mumbai , Mumbai - , India
Phone: +(91)-(22)-65210713
Fax: +(91)-(22)-27710951
Website:
View Catalog
Zhejiang Zglt Heat-shrinkable Material Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: A-501, Building 9, Anju Community, Liushi Town, Wenzhou - 325604 , Wenzhou - , China
Phone: 86-577-61723718
Fax: 86-577-61723716
Website:
View Catalog
Hangzhou Lin`an Tianli Cable Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.288, Maxi Road, Jincheng Street, Lin`An City, Hangzhou - 311300 , Hangzhou - , China
Phone: 86-571-63927011
Website:
View Catalog
China Ningbo Yinzhou Tianjie Industrial Co.,ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Tangye Village, Iangshan Town, Yinzhou, Ningbo - 315192 , Ningbo - , China
Phone: 86-574-88466548
Website:
View Catalog
Haffer Electroplast Private Limited
Trader and manufacturer of service-high density polyethylene pipes, bonded fiberglass wool, fibreglass products, costume jewelry, costume jewellery, hdpe pipes, plumbing pipe, pvc irrigation pipes, etc.
Address: 6, 2nd Floor, Kumbhat Complex, 699/700, Poonamallee High Road, Aminjikarai , Chennai - , India
Phone: 91-44-65460404/65487686
Fax: 91-44-45530186
Website:
View Catalog
Daulat Ram Janak Raj
Wholesale supplier and producer of cotton rope, twines fabrics, ropes fabrics, organza tape, satin tape, webbings, draw cords, leather cords, polypropylene ropes, polypropylene mono filament ropes, cloth fabrics, nylon webbings, jute webbings, twines including high density polyethylene mono filament ropes.
Address: 118/A, MAIN BAZAR, NAJAFGARH , Delhi - , India
Phone: 91-11-25016263
Fax: 91-11-25016263
Website:
View Catalog
Gourav Cables Pvt. Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: B-336, Rajendra Nagar , Bareilly - , India
Phone: + 91 - 581 - 3291383
Fax: + 91 - 581 - 2480082
View Catalog
S.v. Sacks Pvt. Ltd.
Dealers and producers of aluminium containers, packaging bottles, water storage tanks, heat sealable bulk bags, plastic storage containers, polyethylene containers, plastic containers, etc.
Address: Plot No.90/H, Phase- 1, I.D.A . Jeedmetla , Hyderabad - , India
Phone: (91)-(40)-3090018/23094918/23151889
Fax: (91)-(40)-23090020
Website:
View Catalog
Trestar Elektroniks
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: A-8, Meerut Road, Industrial Area , Ghaziabad - 201 003 , India
Phone: + 91 - 120 - 2713235/2713236/3094800
Fax: + 91 - 120 - 2757236
View Catalog
Jaico Electro Worksi
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Ph=3/4, Panch Ratna, Nr Atlanta Manor, Dindoshi, W.ex.highway, Malad East , Mumbai - , India
Phone: 91-022-28401206
Fax: + 91 - 120 - 28495500
Website: jaico.co.in
View Catalog
Jainson Insulation Private Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Plot No. 4 / A, Panchratna Industrial Estate-2, Sarkhej - Bavla Highway, Changodar, Ta: Sanand, Dist: Ahmedabad , Ahmedabad - 382 213 , India
Phone: + - - 251901/251902/251903
Fax: + - - 251904
View Catalog
Gulshan Bansal & Co.
Suppliers and manufacturers of various types of industrial PVC pipes including polyethylene pipes, polypropylene pipes, rigid PVC pipes, seamless PVC pipes, plastic union pipes, PVC flexible pipes and other HDPE pipes.
Address: Plot No. 377, Industrial Area, Phase 1 , Panchkula - 134113 , India
Phone: 91-172-2579985
Fax: --
Website:
View Catalog
A. F. C. China Limited
Dealers and retailers of polyethylene coated food lids, rigid containers, pharmaceutical foils, strip foils, flexible laminates, pouches, aluminium foil discs, food packaging containers, etc.
Address: 1208-06, Liyue Road, Minhang , Shanghai - , China
Phone: (86)-(21)-54333848 
Fax: (86)-(21)-54333948
Website:
View Catalog
Gulzari Lal Banwari Lal
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Shop no.-125, Tripolia Bazar , Jaipur - 302002 , India
Phone: 91-141-9414047224
Fax: --
Website:
View Catalog
Henan Tinde Power co., Ltd.
The cable as a new-type aerial cable is used for transmitting electric power overhead, extensively used in rebuilding of urban and forest region electrified wire netting. It improves the safety and reliance of electrified wire netting. Construction: The conductors are 1350-H19 aluminum ,6201-T81 Aluminum Alloy , or ACSR conductors, concentrically stranded and covered for weather proofing with polyethylene, high density polyethylene(HD) or crosslinked polyethylene(XLPE). Standard: Service drop cable(ABC cable) meets or exceeds the following ASTM specifications: · B-230 Aluminum Wire, 1350-H19 for Electrical Purposes. · B-231 Aluminum Conductors, Concentric-Lay-Stranded. · B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR). · B-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors. · B-901 Compressed Round Stranded Aluminum Conductors Using Single Input Wire
Address: 15th Floor,Block D,Building 18,No.283 Xisanhuan Road, High-Tech District,Zhengzhou City,Henan Province,P.R.China. , Zhengzhou - , China
Phone: 86-0371-68612678
Fax: +86-0371-68613789
View Catalog
Xiamen Brandnew Color Steel Structure Co., Ltd
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No5, Fuming Road, Xike Town, Tong'An, Xiamen - 361100 , Xiamen - , China
Phone: 86-592-59280466
Fax: 86-592-5980499
Website:
View Catalog
Kee Hing Cheung Kee Co.,ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Floor 10, No. 96, Renmin Road, Zhongshan District, Dalian - 116601 , Dalian - , China
Phone: 86-411-82532236
Fax: 86-411-82532211
Website:
View Catalog


Recent Catalogs
Ashirvad known as pvc pipes industry in india having developed number of products such as hand pump ...

Mahavir enterprises is an india based company engaged in the manufacture and supply of molded rubber...

Galio india is manufacturer and exporter of vinyl graphics & decals, self adhesive labels, stickers,...

Producers and wholesale suppliers of printing inks, screen printing ink, pad printing ink, digital p...



1

Move to Tupperware




Move to Modern Plastic Equipments




 
 
Finished & Semi Finished          Products
Plastic Raw Materials &          Supplies
Resins & Compounds
Moulds and Dies
Spare Parts And Components
Plastic Scraps
Thermoplastic Materials
Thermoset Materials
more...
 
 
Plastic Construction Materials
Plastic Medical Products
Plastic Packaging Products
Plastic Pipe Fittings
Plastic Dies & Molds
Plastic Toys & Games
Plastics Mixers
PVC Pipe Plant
Moulds and Dies
Plastic Scraps
Thermoset Materials
Thermoplastic Materials
Plastic Furniture
more...
 
 
HDPE Products
LDPE Products
Polycarbonate Products
Polyethylene Products
PTFE Products
PVC Products
Plastic Bags
Polyurethane Products
FRP Products
more...
 
Plastic HS Codes
Plastic SIC Codes
Plastic Technology
Associations
Acronyms
Periodicals
more...
 
 
 


 Still not able to find what you are looking for ?
 


Product Yellow Pages
Service Yellow Pages
Industry Verticals
eIndiaBusiness MembersCopyright © Plastic Industry Portal. All Rights Reserved
Site Designed & Promoted by Advent Infosoft Pvt. Ltd.